iLoveDXF

照片模板生成器

将照片转换为多层喷漆模板。每层都是独立的切割板，自动添加桥接筋，防止字母中孔等孤岛脱落——全部在浏览器中完成。

每一层切割的色调范围都比上一层更宽。按顺序切割和喷涂，使用共享的对位标记进行对齐。

免费，无需登录。照片在浏览器中处理——不上传任何内容。

拖放，或点击选择 JPG、PNG 或 WEBP

How it helps

Splits a photo into 2-5 cumulative tone layers, each its own cut sheet.
Automatically bridges isolated material islands so they don't fall out when cut.
Shared registration marks on every layer for lining them up when spraying.
Export DXF or SVG per layer for laser or vinyl cutting. Free, browser-local, nothing uploaded.

Best practices

  • - High-contrast photos with clear light/dark separation work best.
  • - Start with 3 layers; more layers add tonal detail but also more fragile cut lines.
  • - Use the invert option if your subject is light on a dark background.
  • - Cut and spray layers in order (lightest cut area first is typical), aligning by the registration marks each time.

Limitations

  • - Bridges are placed automatically by spacing, not hand-tuned per shape — very thin or complex islands may need a wider bridge width.
  • - Very high-contrast, high-detail photos can produce fragile stencils; simplify the photo first if pieces look too delicate.
  • - This treats every enclosed hole the same way; it doesn't distinguish artistically important vs. incidental islands.

FAQ

How does bridging work without breaking the shape?

For every isolated island (kept material fully surrounded by cut area), the tool casts a ray outward from points around its edge until it exits the cut region, then paints that strip back to material directly in the mask before re-tracing — so the fix happens in raster space, which sidesteps needing to synchronize gaps across two separate contours.

Why multiple layers?

A single silhouette loses all tonal detail. Cutting several layers, each covering a wider tone range, lets you spray progressively lighter or darker paint through each one and build up a photorealistic image.

What if a bridge looks wrong on a tiny detail?

Increase the bridge spacing or width, or reduce the layer count — fewer, larger islands are easier to bridge cleanly.

What materials work?

Manila stencil paper, chipboard, and mylar sheets for hand cutting; thin plywood, cardboard, or vinyl for laser/knife cutters.

Is anything uploaded?

No. The photo is processed entirely in your browser and the tool is free with no sign-in.

Image to DXF Voronoi Pattern Generator DXF to G-code DXF Viewer